Outdoor & garden
Outdoor GPOs, garden lighting, sheds and weatherproofing.
Outdoor power point not working
An outdoor GPO is dead — often after rain — pointing at a tripped safety switch from moisture, a weatherproofing failure, or the outlet/run.
Outdoor / garden light not working
An outdoor or garden light is out — could be the lamp, a sensor/timer, weatherproofing/water ingress, or the supply.
No power to a shed or outbuilding
A shed or outbuilding has lost power — points at the sub-circuit/sub-board feeding it, the submain, a tripped protective device, or moisture.
Pool or spa equipment tripping the power
A pool/spa pump, heater, or chlorinator trips the safety switch — a high-risk wet-area fault that needs the leakage found, never bypassed.
Garden irrigation / pump controller not working
An irrigation controller or garden pump won't run the zones/pump — points at the controller power, the solenoids/pump supply, or wiring in a wet outdoor environment.
Doorbell or intercom not working
A wired doorbell or intercom doesn't chime/respond — points at the button, the transformer/supply, the chime/unit, or the wiring.